Technical Specification

2. Fuel tank Chassis-mounted
2. 1. Capacity 20000 l fully usable
2.2. Acceptable deviation in capacity up to 2%
2.3. Single capacity, divided by partition walls with holes of min. 600 mm, open to the bottom, roof, walls p. 5.7.4.18 of Standard
2.4. Material Aluminum alloy
2.5. Inclinations to the draining points for good conduction of water and dirt 5%
2.6. 15-minute hydrostatic inspection of the pressurised tank 10.5 atm.
2.7. Min. Roentgen images of the welding seams 25 % of the seams’ volume
3. Special equipment The specific equipment for fuel load in the cistern tank to be designed for working pressure of 10 atm. (145 psi)
3.1. Mobile platform – Hydraulically lifting platform located between the cock-pit and the cistern pump department, standard labels for height, loading capacity, manufacturer, and safety labels to be written. All legal safety requirements for lifting equipment to be met. Location level (in put-down position of the platform) to be on the level of the cistern chassis. The height (of the equipment in put-down position of the platform) – not higher than the cistern tank.
Share